Split System Installation in Melbourne
A split system is one of the simplest ways to heat and cool a room. You get an indoor unit on the wall, a compact outdoor unit, and a remote that handles both summer and winter.
O’Shea Trades has been working in Melbourne homes since 1978, and we bring that same fixed-price, licensed-trade approach to split system installation in Melbourne. Whether it’s one unit for the main bedroom or a few spread across the house, we handle the supply, the install and any electrical work with our own team.
We have helped over 50,500 Melbourne homeowners over 48 years.
Split System Types
The right setup depends on how many rooms you want to cover, your home’s layout and where the outdoor unit can sit.
Wall-Mounted Split
The most common option. One indoor unit is paired with one outdoor unit, suited to a bedroom, study or open-plan living area.
Multi-Split
Several indoor units run off a single outdoor unit. It suits homes where wall space outside is limited or you’d rather not have several units lined up along the side of the house.
Floor Console
Sits low on the wall near the floor rather than up high. It’s a good fit for rooms with limited wall height, under windows, or where you want heat closer to the ground.
Split Systems Melbourne Homes Rely On
Split systems in Melbourne have become a go-to for both heating and cooling. They’re efficient, quick to install and let you control each room separately, so you’re not paying to heat or cool spaces no one is using.
They also make sense for homes moving away from gas room heaters. Under the Victorian Energy Upgrades program, eligible households can receive up to $1,610 off when replacing a non-ducted gas heater with an approved high-efficiency reverse cycle air conditioner. Eligibility and discounts vary, so we’ll explain what’s available when we quote.
If you’re looking at heating and cooling the whole house from one controller, a ducted system may suit better. We’ll help you weigh up both.
Split System Supply and Install
We offer full split system supply and install in Melbourne, so you don’t need to source a unit yourself and hope it suits the room. We recommend a system based on your space, then handle everything from mounting to commissioning.
When we look at your home, we consider:
- Room size, ceiling height and how much sun the space gets
- The right unit capacity, so it isn’t straining or cycling on and off
- Where the indoor and outdoor units sit for airflow, noise and looks
- Pipe and cable runs between the two units
- Whether your switchboard and circuits can handle the extra load
Our Installation Process
Every split system air conditioning installation in Melbourne we take on follows the same stages, whether it’s a single unit or a multi-room setup.
Connect
Tell us which rooms you want to cover and what’s not working with your current heating or cooling.
Consult
We come out to look at the space, check wall construction and outdoor unit placement, and talk through system options with you.
Quote
You’ll get a fixed quote in writing covering the unit, installation, labour and any electrical work, before anything is locked in.
Install
Our team mounts the units, runs the pipework and cabling, and connects everything on the agreed dates. Our own electricians handle any dedicated circuits or switchboard upgrades.
Handover
We test the system, show you how the remote and settings work, and sort out any final adjustments.
Servicing and Upkeep
A split system doesn’t need much, but a little care keeps it efficient and quiet. Clean the indoor filters every few months, keep the outdoor unit clear of leaves and garden growth, and book a professional service every couple of years.
Signs your split system needs attention include:
- Weaker airflow or the room taking longer to heat or cool
- Water dripping from the indoor unit
- Unusual noises, rattles or musty smells
- Higher power bills with no change in how you use it
Service Areas
Our heating and cooling team works across the same area as the rest of O’Shea Trades, from the inner east through to the eastern, south-eastern, northern and western suburbs.
Adding a split system often comes up during a bigger project. If you’re planning an extension or a refresh, take a look at our home renovations in Melbourne that homeowners have trusted us with, or browse all our renovation services to see what we can scope alongside it.
Why Choose O’Shea for Split System Installation
A split system should run reliably for years, so it pays to have it installed properly from the start. With O’Shea, you get:
- Licensed electricians in the same business, so wiring isn’t handed to an outside contractor
- Systems sized for the room, not just the cheapest unit available
- One fixed price before work starts, with no surprises halfway through
- A single point of contact from the first site visit to handover
- A genuine workmanship guarantee on the finished install
Split System FAQs
How long does split system installation take?
A standard back-to-back install, where the indoor and outdoor units sit on opposite sides of the same wall, is often done in half a day. Longer pipe runs, multi-splits or electrical upgrades take more time.
What size split system do I need?
It depends on the room’s size, ceiling height, insulation and sun exposure. We’ll measure up and recommend the right capacity as part of your quote.
Do I need a new circuit for a split system?
Many larger units need a dedicated circuit, and some older switchboards need upgrading. Our electricians check this during the consult so it’s included in your fixed price.
Can a split system heat as well as cool?
Yes. Reverse cycle split systems provide both heating and cooling, and they’re one of the most efficient ways to heat a room.
Can I spread the cost over time?
Yes. Flexible payment plans are available through our finance options, subject to approval.
Let’s Get Your Split System Sorted
Whether it’s one unit for the bedroom or a multi-room setup, our team handles split system installation in Melbourne from supply through to handover.
Need more than heating and cooling? Have a look at the trades we cover to see what else we can handle on the same job.
Call us on 03 9937 0404 or request a quote online, and we’ll book a time to look at split system options for your Melbourne home.